Steampunk Jewellery

I've just started making some Steampunk Jewellery. The true Steampunk officianatos amongst you will point out that these are not Steampunk. "Stick a few gears on it and call it Steampunk". But they are Steampunk-esque and Steampunks would be able to punk them even further - I have plans.

They are watch parts suspended in resin. I start with a thin layer of resin at the bottom of the bezel and place the first layer in. This then has to dry for at least 24 hours. Then I add another layer of resin and then next lot of watch parts go in and it has to dry for another 24 hours. Finally, I finish with a final layer of resin over the top to dome the pieces and cover up sharp parts. On some of them, the parts are too tall to be completely covered but the result is still beautiful and you get a different look. 

And then the detail: What I love about this one is the big watch part in the background and then the gears fitting back into the original places creates a really strong look.

 

 The Square one has lots of little bits in the background with the gears and cogs suspended above them. It looks far more 3D in real life. The little bits create a texture that I think works really well with the antiqued silver bezel.

And finally (for the moment), the watch fob. It was fun putting the gears into place in such a way that you can almost imagine them working together. The watch fobs have real depth to them because the back is slightly concave, so I could get more layers in. These actually have three layers before the final doming layer.

I will post more pieces up soon. I have lots of plans on what to do with these and my fingers are just about bleeding from pulling the spindles out of the middle of little teeny tiny cogs and I'm sure I'm going blind squinting at these tiny pieces. Don't worry, I have a magnifying glass and my fingers will heal.

These are for sale. They come with a matching necklace and boxed in a cute hand-made gift box.

Trying out a new design

While I love the double layered, padded iPad case design I've done, as I scale them up for bigger devices, they get bulky and I still want a case that will fit into a reasonable sized bag. So, I came up with the idea of using felt as a lining.

So here is my first foray into a lined bag. This is big enough to hold my 13" MacBook Pro which has a hard clear protective case on it, but only just. It is very snug. Next time I'll make it just a tad bigger so that a laptop can slide in and out easily. It has a velcro closing. Simple, but does the job.

What do you think? I'm thinking similar sleeves with outside pockets to hold the USB Superdrive and the power cable, plus two more for the thunderbolt cables I've also got for it. What else is essential in a laptop sleeve, without it having to become a bag in it's own right.

The outside uses a new Skull & Crossbones design that has just arrived in and I've coupled it with some cool matching Skull & Crossbones felt. There is a strip of black tape running around the outside to cover up where the tape meets. It is very strong. There are two layers of tape over the felt before you get to the Skull & Crossbones tape, so this is not going to fall apart any time soon.

It isn't padded like the other device cases I've made but the felt protects the laptop case from scratches.

If you like this idea but would prefer a different design, please let me know. I have several felts and soft fabrics to use on the inside.

New Duct Tape designs arrived

I've just received a new delivery of duct tape from the US and today I cut out swatches for my etsy store.

I can't wait until all the patterns make it over here so that I don't have to beg people to bring them with them when they come to visit.

And this is the sort of thing I'm making with the duct tape. Some of it is Duck Brand, some Scotch/3M, but some of it is more obscure names that I don't expect will ever make it to this side of the pond.

I've made some stuff and put it up on my Etsy store: http://judihodgkin.etsy.com. If you see something that takes your fancy but you would prefer one of the new tapes, please contact me and I'll make it up for you. Alternatively, you might have an idea for something. If so, let me know and I'll see if I can do it.

A quick decorative feature

My little girl loves to see photographs of herself - what child doesn't?

She has been pestering me to repaint her room. Currently, it is a lovely shade of 80s terracotta. She has been saying for about six months "please would you paint my bedroom, Mummy. I hate pink."

I've currently managed to paint just over half of the room. It starts out dark blue at the top and fades down to a light sky blue, then from waist height down, it is a soft cream. This allows me to use the cool colour she so loves, but warms up in the cream area. Once the base is complete, I'll sponge more of the cream, watered down, to form clouds. I'm keeping it simple so that the room doesn't feel crowded as it is only just over 3 metres by 3 metres (10 ft x 10 ft).

But the walls will need some things. I have loads of ideas of what I want to put up. I've picked up some drum protectors that I'll use to encapsulate some of her art work in.

A friend of our gave us a photo frame. It was pink. Pink. I thought originally I would paint it but it is a plastic that has resisted the paint I was going to use.

Then I bought some canvas self-adhesive tape. It adheres to the frame beautifully. Eureka!

If you enlarge the photo, you can see that the tape has been layered on in little shapes to give texture to the piece.

Next, I brushed a layer of water into the tape to break the surface tension and then brushed three colours of Dylusions spray dies - After Midnight, Calypso Teal and London Blue - in random patches across the entire frame, using more water to allow it to blend even more.

I then laid a huge number of flowers from Prima on my non-stick craft sheet and sprayed them with the same colours. After drying them in the oven on defrost setting (it's rather cold here at the moment), these were glued on randomly across the frame to add interest and texture.

Simple, but effective. I don't want to add more to it because I don't want any one picture to dominate in her bedroom. Sometimes simple is good.

Craft, Hobby & Stitches 2014

Display in entry

I managed to head to the annual craft trade show in Birmingham this year for two whole days. This enabled me to spend more time looking for things and to take a few classes.

This year the organisers had a Seminar stream to support businesses. I felt that these were under attended but I'm not entirely sure why - was it a lack of advertising or a lack of interest from retailers?

Of the Seminars, I got to attend four. The first was by Intelligent Retail on how to optimise your website for Google. It was very dry and full of techy speak. Being a techy speaker, I was struggling to follow it so I have no idea how easily a non-techy speaker would have coped, and they ran over time so there was no opportunity to ask questions.

One of Lisa Pavelka's samples in her class.

The second was from Bounti in association with ActiSmart and the description said it was on "how to leverage mobile technologies to build meaningful and valuable customer relationships, without the impersonal side of large scale database systems." It did not come across as that. It was far more useful, in fact, as Jess Cosad spoke about the best ways to communicate with your customers, using digital technologies.

Next, we heard Sara Davies' of Crafter's Companion story of her journey in the craft industry. It was amazing to hear first-hand how having the right idea at the right time and the tenacity and perseverance to push it through paid off.

The last seminar was from Craig De Souza of CHA-UK who spoke about the research that they have done into the craft industry in the UK. There sounds like a huge amount of incredibly valuable information there and support for retailers building there that if you're a craft retailer and not a member, you should be.

I also use Stitches to refresh skills and so I enrolled on some of the courses on offer. Each class is only 45 minutes long, so not really enough time to get a huge amount done but it is a great taster into a particular craft. Lisa Pavelka gave an extremely good, quick class on creating jewellery using Magic-Glos, Leandra Franich refreshed me with the use of paints, stamps and stencils, Wyatt White of Beadalon showed us how to make a simple necklace and earring set and Kim Thittichal showed us how simple the Hot Spots! from Vilene are to use to great effect with glitter and foils.

Nearly every vendor had new products to display but they were all extensions of product lines already in existence. There were a few exceptions.

Once Upon a Stamp have released their own die-cutting machine and thin plate dies to the market under the name Jus-Cutz. I have a few to play with so stay tuned for my review of their thin metal dies and I hope to be able to get my hands on the machine soon.

Photomate were new to the show but launched to great success in the US just recently at CHA. Their product is a photography backdrop and display stand for improving your photos for use in advertising and on your website. Nothing new you say, well the difference is that Photomate is inexpensive at £29.99 and folds flat easily for storage. It is small enough that you can have it assembled at one end of your craft table while you work and quickly move over to take step-by-step photographs of your project. Tina, who owns the company, is a cake crafter and wanted something that would fit her bill so invented it. I hope to be able to do a full review on the Photomate soon, so stay tuned for that too.

Spectrum Noir pens (left) with pencil (right)

If you're a fan of Crafter's Companion's Spectrum Noir alcohol pens, then you'll need to think seriously about investing in the new pencils. These are a wax medium in pencil form with colours directly matched to the alcohol pens. They blend beautifully on their own or you can use the blending solution to almost melt the colours together.

There was a lot more that I saw, but for me, these were the highlights.

A morning filled with butterflies

This morning I've been playing with some more new toys that arrived the other day. I finally have a Vagabond by Tim Holtz for Sizzix. As usual, my first thing when I get new toys is to try them out and see what I can achieve with them. So far, so good...

Until I got to some of the other toys I was given at Stitches a few weeks ago. Among my gifts is one of the Spellbinders M-Bossabilities folders. Fantastic idea. It takes the embossing folder one step further by making them double sided so you have two choices of patterns for the price of one. This does make them a little thicker than the Sizzix embossing folders, so the normal "sandwich" recipe doesn't work. Still, I didn't want to break my brand new Vagabond, so I approached with caution. No help out there on the Internet that I could see from a google glance and the sandwich I used in the Big Shot doesn't work on the Vagabond. Please note: never force a sandwich through your die cutting machine or you may break it. Approach with caution and start with it being too loose and shim up as needed. It is better to waste a few sheets of card trying to get the perfect result than busting up your machine because you tried to jump ahead too quickly.

So, with a little trial, here is my sandwich recipe.

- Solo Platform with Solo Shim in place

- 3-7 sheets of cardstock, depending on how thick your cardstock is - start with a few and build up until you achieve the result you want. I used the thickness of my Texturising Pad as a guide.

- The diffuser of choice, taped to

- The M-Bossabilities folder

The tape will prevent the Diffuser from shifting while you run it through the Vagabond. Since it will be upside down as it goes through, you won't be able to see it if it shifts.

So here are laid out all my ingredients and the sandwich made up ready to go through (I left the card shim sticking out for the photo, but you should tuck this in before sending it through the machine.

Completed embossing with diffused centre

Finally, the completed embossing with the centre diffused. What I like most is that there isn't a harsh line between where the embossing ends and the diffused section begins, as there is on embossing folders where there is a gap. I also like that you can choose where the diffused bit is. Plus the set also comes with the cut out centres so you can choose to emboss a section in the middle and leave a border unembossed.

Generally, when I make cards, I make a card front separately from the card itself. This allows me to get mucky without wasting a perfectly good card blank. There are so many other freedoms it affords: I can choose a different colour card blank from my card front, I can put my A6 front onto an A5 card if I want a bigger card and I can make all the mistakes I want.

Completed card fronts

I ran two fronts cut down to A6 size (11.5 x 14.8cm) through as outlined above and here are the completed fronts.

The butterfly on the left is made using the Layered Angel Wings Die by Tim Holtz for Sizzix. They were sprayed with Dylusions Ink Sprays and dried with my heat tool. I then ran around the edges with Vintage Photo Distress Ink and swapped the two smaller pieces from one wing with the same from the other, turned them upside down to give the feel of a butterfly. The body was created by simply painting a stripe down between the two wings. The edges of the front were inked with Broken China and Peeled Paint Distress Inks using an Ink Blending Tool.

The right side is a bit more of an experiment. Using Jet Black Archival Ink, I stamped the butterfly from the Fairytale Frenzy set by Tim Holtz for Stampers Anonymous in the diffused centre and then blended Vintage Photo Distress Ink around the edges but it was missing something. So I spritzed Bubblegum Pink, Crushed Grape and Postbox Red and dried with a heat tool. Better, but now the butterfly had disappeared, so I stamped the butterfly again and cut it out.

You can see that the texture of the sprayed background is different from the cut out butterfly. I simply brushed the ink on rather than spraying. Not only does this give you more control, but the inks blend so beautifully. If you've seen Dyan Reavley demonstrating her inks, she uses water brushes from Ranger to paint with. This is a great idea, especially when you're travelling but at £9.99 per brush its going to take me time to buy 12 (and a further 6 for the new colours about to arrive). So, in the interim, simply twist the lids off and turn upside down next to the bottle and use the open bottle like an ink well.

Posted with Blogsy on my iPad

It's amazing what you get done...

...when you don't have a three-year-old going "Mummy, Mummy, Mummy"!

Yesterday afternoon while G was having her afternoon nap (I'm not sure how much actual sleeping she gets done, but it's two hours of quite time for both of us), I hauled out my travelling crafting stuff and started to play with some of the things I was given at Stitches (the UK craft Trade Show) this year.

So this morning while G is off having her first trial morning at Nursery School, I'm compiling together some of my discoveries. Most of this will be old hat to the more seasoned crafters (I'm Leading Edge, not Bleeding Edge), some of you may have not had a chance to play or have had failed attempts.

I'm playing today with the Spellbinders Nestabilities Majestic Elements. I took at workshop with Kim Hupke at Stitches and she very generously gave us each something to take home. This was my choice.

This is the set as it comes out of the packet. There are seven different dies in the set but the possible combinations are amazing. I understand that they are also sized to work with other Nestibilities so if you have them, it becomes mind boggling as to what you can achieve. The first thing I do when I get a new set of dies is to cut them out on plain paper to see what they look like cut. This gives me ideas of what might be possible. With these dies, they are so incredibly intricate that I think doing a plain cut is essential. Even if you choose to use them rather than keep them for reference, at least you'll have an idea of what is possible with them.If you're doing this with the Nestabilities, note that it is fiddle to get them lined up properly. You will need some low-tack tape. If you don't have any to hand (like me), normal tape will do, but rub it a few times on your trousers to remove some of the stickiness.

If you own a shop, position your low-tack tape right next to the spellbinder dies so that customers can easily pick them up when they buy the dies and if they approach the counter holding the dies, take the opportunity to suggest the additional purchase.

After taping all the dies down, I ran them through my Big Shot. Here is my sandwich recipe for the perfect cut using standard cardstock:

- Multipurpose Platform with all the tabs on it

- 2-3 sheets of lightweight cardstock

- Cutting plate

- Cardstock I'm cutting face up

- Dies cutting side down

- Cutting plate

When you run this sandwich through the machine, it should resist going through but not completely halt. If it goes through relatively easily, add another sheet of cardstock at the second layer. If it is too stiff, remove a sheet. I ru. It through and then just before it releases, rewind it back through the machine just to be sure. Never force a sandwich through the machine.

On these very intricate designs, you may find after a couple of uses that the dies are difficult to remove. Spellbinders advise to put a piece of wax paper between the die and the cardstock. since we don't have wax paper here in the UK, rub over the surface with a wax candle, blitz it with your heat gun and then rub down with a cloth to take off the excess.

This is the set, cut, embossed and stencilled. You can see there is some really fine detail that gets picked out when you emboss over the top. I've used Walnut Stain Distress Ink to really show up the details.

Some of the dies only emboss and stencil, not cut. It's fun to play around and see what you can come up with.

Next thing I've done is cut each die out separately so I could see exactly what each die is capable of.

You can see from the above photo that the fourth largest and smallest dies don't cut out a frame, but I'm imagining how the fourth largest would look on a photo.

My final thing I've done is to try out the die cut in a couple of ways. Firstly, I used No.1 and No. 3, taped both dies down and cut and embossed them. I removed the tape while leaving the dies in place and inked over the dies. I really love the sharp edges you get from inking over the die.

Finally, using No. 1, No. 4 and No. 5 I cut using a tomato paste tube. I have a few tips for using these.

- Cut the top and bottom off the tube as close to the ends as possible.

- Cut a sliver of tube off the side and unfold.

- Wash thoroughly (I throw them in the dishwasher).

- Run them through your die cutting machine as though you were embossing it to flatten it.

- now it's ready to die cut.

My sandwich recipe for cutting and embossing the tomato paste tubes on a Big Shot using Spellbinder dies is as follows:

To Cut:

- Multipurpose Platform with all the tabs on it

- 3-4 sheets of lightweight cardstock

- Cutting plate

- Tomato past tube I'm cutting with the inside face up

- Dies cutting side down

- Cutting plate

To Emboss:

- Multipurpose Platform with the top tab pulled back

- Cutting plate

- Die face up with cut cardstock on top

- Embossing pad

- Embossing plate

There are a few things you need to take into account when cutting metal. Firstly, metal picks up more detail than cardstock does. If your cutting plates are very old and therefore quite marked, some of this texture may show through on the final cut. Secondly, you'll need to tape the dies down before you run them through for the cut pass. No matter how steady your hand is, they will shift. However, if we go back to the previous point about metal picking up more detail, you need to remove the tape before you run through for the embossing pass or you'll end up with some very nice tape marks on the metal. Finally, the tiny little holes will not cut on tomato tubes. Although the metal is very soft and pliable making it ideal for this treatment, it is thick enough that it simply cannot cut these tiniest of holes. I actually like the look - little dimples.

If you're a teacher like me and you're planning to use these dies in a class, can I please advise you of one thing: design the class so that the students cut out their own die cuts. Although this will complicate things if you've either got lots of students and/or only one machine, trying to cut out all the dies needed for a class will drive you insane. In fact, if you can't see any other way of doing the class than having the dies pre-cut, hire a errant teenager to do this. The hours of poking little pieces of paper out of the dies will be punishment enough for any transgression committed.

I think you'll really love these dies. The delicacy of the finished die cut is amazing. They almost look like lacework. I almost wish they were my idea!

Posted with Blogsy on my iPad